Please HELP with ebrake..........!!!!!!!!!
Thread Starter
Senior Member
Joined: Mar 2000
Posts: 597
Likes: 0
From: Michigan
Please HELP with ebrake..........!!!!!!!!!
I am in the process right now of doing a drum rear swap and have gotten everything disconnected except the ebrake cable. It says nothing about it in the Haynes manual. The haynes manual also skipped over a few important steps in removing the rear end, such as remove the track bar. I'm really losing faith in the Haynes..........
bsa
------------------
"If they do not run, Then they will die." - Stonewall Jackson
'87 IROC, 355 TPI,700R4, Trick Flow Heads, Comp Cam, Comp 1.6 Rockers, Lucas 23# injectors, Edelbrock headers, Flowmaster 3'' exhaust, gutted cat,
Mallory coil, Mallory HyFire IV ignition box, Mallory Sidewinder 8mm wires, Autolite platinum plugs, K&N filters, Transgo Performance Shift Kit, Corvette Servo, 2,000 Torque Converter
bsa
------------------
"If they do not run, Then they will die." - Stonewall Jackson
'87 IROC, 355 TPI,700R4, Trick Flow Heads, Comp Cam, Comp 1.6 Rockers, Lucas 23# injectors, Edelbrock headers, Flowmaster 3'' exhaust, gutted cat,
Mallory coil, Mallory HyFire IV ignition box, Mallory Sidewinder 8mm wires, Autolite platinum plugs, K&N filters, Transgo Performance Shift Kit, Corvette Servo, 2,000 Torque Converter