swap help fast
Thread Starter
Junior Member
Joined: Dec 2003
Posts: 33
Likes: 0
From: San Jose
Car: 70 ta 70 camaro
Engine: 455 383
Transmission: 4 speed
swap help fast
hey people i have a problem i have only a couple of days to chose i have to buy either a 91-92 camaro one is auto one is manuel. now i am going to do a 99-02 engine and tranny swap from a vete or camaro. the 91 camaro is auto and i wanted to know would it be to much to convert this to the ls1 with 6 peed from the 99-02 vette or camaro or should i just get the 92 manuel camaro and do the conversion since it is stick please let me know what you think. also should i use the engine and tranny from the 99 camaro or the 02 vette what would be eaiser. thanks please help
Supreme Member
Joined: Jul 2003
Posts: 1,096
Likes: 0
From: Lima, OH
Car: '89 Formula 350 & '86 Z28
Engine: L98 & 355ci
Transmission: 700r4 in both
Re: swap help fast
*****Here is the easy to read format*****
Hey people I have a problem and I only have a few days to choose. There are two camaros 91-92, one is an automatic and the other is a manual. I plan on doing an LS-1/T-56 swap.
Is the automatic going to cost me anymore or be any harder to swap the LS-1 or should I just get the one with the manual transmission?
Would the LS-1 swap be easier using a 99 Camaro or a '02 vette??
Thanks
-----------------------------------------------------------------------------------------------
I dont know your answer, but you will more likely get a better responce with an easy to read/understand question...
Hey people I have a problem and I only have a few days to choose. There are two camaros 91-92, one is an automatic and the other is a manual. I plan on doing an LS-1/T-56 swap.
Is the automatic going to cost me anymore or be any harder to swap the LS-1 or should I just get the one with the manual transmission?
Would the LS-1 swap be easier using a 99 Camaro or a '02 vette??
Thanks
-----------------------------------------------------------------------------------------------
I dont know your answer, but you will more likely get a better responce with an easy to read/understand question...
Last edited by SweetS10v8; Jan 4, 2004 at 04:51 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM





