I need some good pics of an tpi motor, slightly disasembeld. I'm putting mine back together and have forgot were a cuple of parts go. Like on the intake manifold two of the bolts are on a black bracket were didnt that go?

------------------
87 Z28 305 TPI, Auto, 2.73, Gutted air boxes, K & N fillters, SLP Airfoil, Dyno Max 3" cat back, Accel 8.8 mm spirals, Accel cap and rotor, Accel coil, rapid fires, and 170* Stat.
Best 15.414 @ 87.47.

 

That bracket was probably the holder for your ignition coil...

------------------
microtech8@triad.rr.com

1987 White IROC-Z
305 TPI LB9 273 Rear Gear
700-R4 auto tranny
97,000 miles
KYB's
Performance Resource Chip
Flowmaster Muffler
Ported/Polished Plenum by "Daniel Burk"
Holley AFPR
Throttle Body Coolant bypass
TPIS air Foil
TPIS MAT Relocation Kit
K&N's
Gutted air box
Accel 8.0 plug wires
Moroso Super Coil
Blue Streak Cap and Rotor
Boush Patinum +4's
Mobil 1 15/50 Synthetic motor oil
Mobil 1 synthetic Trans fluid.
My Car: http://albums.photopoint.com/j/ViewP...240&p=36621420

 

Ok that acounts for two bolts, now I'm one short it is in a silver (aluminum) bracket.

 

The '86 photos I have won't help with the separate coil, but everything else should be the same.













Lemme know if you need different photos of a pointing finger.

------------------
Later,
Vader
------------------
"I'm gonna talk about some freaky sheet now..."
Adobe Acrobat Reader 4.0
KaleCo Auto Parts

 

as usual, Vader Delivers.



------------------
60 Ranchero - Project ( Money Hole )
85 Sport Coupe LG4 - Daily Driver

Livin' the Stereotype