Where to get new MAF connector?
#1
Senior Member
Thread Starter
Join Date: Jul 1999
Location: Concord, NC
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC-Z
Engine: Superramed 355 w/ intercooled T72
Transmission: T56 -=- www.iroc-ss.com
Where to get new MAF connector?
I need to get a new one. Anyone know where to locate them? Or, does GM actually sell these without buying a whole dang harness. I went nuts trying to get connectors for my T56 from them.
------------------
Mark Lock
- 86 IROC-Z - SuperRammed 383/T56
- -= IROC Online =- - The site dedicated to the IROC-Z
------------------
Mark Lock
- 86 IROC-Z - SuperRammed 383/T56
- -= IROC Online =- - The site dedicated to the IROC-Z
#2
Guest
Posts: n/a
You can get them from a decent parts store. Standard Ignition is a parts company that sells them, and I think Dorman/Motormite has them as well. More than likely wherever you get it they will have to order it, and IIRC the connector is about 10-15 bucks.
#3
Supreme Member
iTrader: (31)
Ummmmm, you might want to grab a pair of dykes and try your local junkyard. Almost every GM car with a MAF sensor used the same style plug. They'll probably let you have the connector for nothing. If they're really petty, you may have to give em a buck for it. I bought a used TPI harness that needed a lot of connectors replaced, and I got every one I needed from the junkyard for like a couple of bucks.
------------------
89RS w/350 TPI; 69RS/SS w/450 HP 350/Muncie 4-Speed "Too weird to live, too rare to die."
------------------
89RS w/350 TPI; 69RS/SS w/450 HP 350/Muncie 4-Speed "Too weird to live, too rare to die."
#4
Supreme Member
iTrader: (1)
Join Date: Feb 2000
Location: Savannah, GA
Posts: 2,361
Likes: 0
Received 1 Like
on
1 Post
Car: 1997 Jeep Wrangler
Engine: 4.0L
Transmission: 5 speed
Axle/Gears: 8.8 rear, 4.56 gears, 4:1 transfer
Pep Boys has them in the help section, just ask. Not a special order part.
------------------
86 Camaro Sport
383 Speed-O-Motive Crate Engine, Trick Flow Twisted Wedge G2's, 58mm Accel TB, 3.73 Auburn Pro, SLP Cold Air Induction and Headers, Dynomax Cat-back, Serpentine Belt Setup, Dual IROC Fans, Jamex springs, 16" IROC Rims, 36mm/24mm Sway Bars, Global West Steering Brace. Hotchkis Rear LCA's,Panhard Bar and SFC's.
My Camaro Project
------------------
86 Camaro Sport
383 Speed-O-Motive Crate Engine, Trick Flow Twisted Wedge G2's, 58mm Accel TB, 3.73 Auburn Pro, SLP Cold Air Induction and Headers, Dynomax Cat-back, Serpentine Belt Setup, Dual IROC Fans, Jamex springs, 16" IROC Rims, 36mm/24mm Sway Bars, Global West Steering Brace. Hotchkis Rear LCA's,Panhard Bar and SFC's.
My Camaro Project
#5
Originally posted by Pat Hall:
Ummmmm, you might want to grab a pair of dykes and try your local junkyard...
Ummmmm, you might want to grab a pair of dykes and try your local junkyard...
I understand the junkyard thing, but I'd rather go by myself, thanks anyway. I might take some diagonal cutters, though...
------------------
Later,
Vader
------------------
"I'm gonna talk about some freaky sheet now..."
Adobe Acrobat Reader 4.0
KaleCo Auto Parts
#6
Supreme Member
Join Date: Jul 2000
Location: Kempner,TX,
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1996 Vette / 1992 GSX1100F Suzuki
Engine: 1996 Corvette Coupe 388 LT1 (+.060)
Transmission: Auto
Axle/Gears: 3.07
I got mine from AutoZone. They have most of the replacement sensor connectors you'll need hanging in the electrical area.
Jake
------------------
1986 Corvette Coupe, 415 CID, Edelbrock 6073s, ZZ9
Jake
------------------
1986 Corvette Coupe, 415 CID, Edelbrock 6073s, ZZ9
#7
Supreme Member
Join Date: Mar 2000
Location: Central NJ, USA
Posts: 13,414
Likes: 0
Received 6 Likes
on
6 Posts
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Hm, this question sounds familiar...
https://www.thirdgen.org/messgboard/...ML/002705.html
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
https://www.thirdgen.org/messgboard/...ML/002705.html
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Thread
Thread Starter
Forum
Replies
Last Post
BumpaD82
Tech / General Engine
37
02-26-2016 02:57 PM
MikkoV
TPI
2
09-09-2015 04:25 PM