coolant hose question...
Thread Starter
Joined: Oct 2002
Posts: 1,866
Likes: 5
From: Salem, NH
Car: 1999 Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23 10 Bolt
coolant hose question...
this is on a tpi engine... if i were to do away with the heat in my car, could i put a brass plug in the hole in the front of the intake manifold where there is a coolant passage for coolant to go through all the hoses to the heater core and back to the radiator.
basically thered be just two hoses to the engine, the upper and lower rad hoses and an overflow bottle.
basically thered be just two hoses to the engine, the upper and lower rad hoses and an overflow bottle.
Supreme Member
iTrader: (5)
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
yes sir block them all off. 
don't forget about the coolant that flows through the throttle body as well.
don't forget about the coolant that flows through the throttle body as well. Thread Starter
Joined: Oct 2002
Posts: 1,866
Likes: 5
From: Salem, NH
Car: 1999 Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23 10 Bolt
yeah i did the throttle body coolant bypass before...
excellent this should make for one clean engine bay...
thank you
Joe
excellent this should make for one clean engine bay...
thank you
Joe
Thread
Thread Starter
Forum
Replies
Last Post
