ok i know this isnt gonna last but i have gotted too many email requests for a repost
Thread Starter
Senior Member
Joined: Feb 2001
Posts: 559
Likes: 0
From: PORT RICHEY, FLORIDA
Car: 1983 Camaro Sport Coupe
Engine: 1986 305 C.I.D. Bored .030 over
Transmission: TH350 W/Shift Kit
Axle/Gears: 3:08
ok i know this isnt gonna last but i have gotted too many email requests for a repost
------------------
1983 CHEVROLET CAMARO with a 1986
305 C.I.D.V8 BORED .030 OVER
HIGH VOLUME OIL PUMP
FLAT-TOP PISTONS
MILD CAM
3" CAT BACK EXHAUST W/ FLOWMASTER MUFFFLER
KEYSTONE CLASSIC WHEELS.
B&M RATCHET SHIFTER
STAGE THREE SHIFT KIT
(she'll spin em into third)
CHECK OUT MY SITE http://www.fbody.com/members/bigdaddyshawn/
MUSTANGS SUCK
[This message has been edited by 83CAMAROMAN (edited February 28, 2001).]
[This message has been edited by ede (edited February 28, 2001).]
Either Your Self destructive, Or Just Dumb.
------------------
60 Ranchero - Project ( Money Hole )
85 Sport Coupe LG4 - Daily Driver
Just another Hot Rod kid, or thats what they all tell me.
Livin' the Stereotype
------------------
60 Ranchero - Project ( Money Hole )
85 Sport Coupe LG4 - Daily Driver
Just another Hot Rod kid, or thats what they all tell me.
Livin' the Stereotype
Thread Starter
Senior Member
Joined: Feb 2001
Posts: 559
Likes: 0
From: PORT RICHEY, FLORIDA
Car: 1983 Camaro Sport Coupe
Engine: 1986 305 C.I.D. Bored .030 over
Transmission: TH350 W/Shift Kit
Axle/Gears: 3:08
either im self destructive or just dumb??,,,,, hmm as if its going to kill me if they kick me ... i got emails frome several members(whom i would not like to mention) telling me they loved that post and that ede was a little too **** sometimes about what he locks, im not arguing with ede i know it isnt tech but every once in a while we all need a break and we all dont want to go to netthirdgen.org or whatever it is
sorry if i offended you.(what are you some kind of squirrel activist!??!!!??)
------------------
1983 CHEVROLET CAMARO with a 1986
305 C.I.D.V8 BORED .030 OVER
HIGH VOLUME OIL PUMP
FLAT-TOP PISTONS
MILD CAM
3" CAT BACK EXHAUST W/ FLOWMASTER MUFFFLER
KEYSTONE CLASSIC WHEELS.
B&M RATCHET SHIFTER
STAGE THREE SHIFT KIT
(she'll spin em into third)
CHECK OUT MY SITE http://www.fbody.com/members/bigdaddyshawn/
MUSTANGS SUCK
sorry if i offended you.(what are you some kind of squirrel activist!??!!!??)
------------------
1983 CHEVROLET CAMARO with a 1986
305 C.I.D.V8 BORED .030 OVER
HIGH VOLUME OIL PUMP
FLAT-TOP PISTONS
MILD CAM
3" CAT BACK EXHAUST W/ FLOWMASTER MUFFFLER
KEYSTONE CLASSIC WHEELS.
B&M RATCHET SHIFTER
STAGE THREE SHIFT KIT
(she'll spin em into third)
CHECK OUT MY SITE http://www.fbody.com/members/bigdaddyshawn/
MUSTANGS SUCK
i'd check your piston filters, if that is good then your low on blinker fluid
just my .02$
------------------
92 F-BIRd FORMULA T-TOP (WHITEKNIGHT) 5.7L-98,700R4B&MSATURDAY NIGHT
SPECIALTRANS 2500STALL,54MM-AS&M TB-PORTPLENT,LARGETUBRUN,L-98 ALUM. HEADS PORTED
UNDER PULLEYS K&NCOLD AIR KIT,160THERMO,ELDB HEADERS W/3 1/2 Y PIPE 2 RINO CAT 2 4INCH PIPE 2 FLOW,
MSDDIST,6AL,8MMWIRES.
2BLASTERCOIL.ACCELL PLUGS
CUSTOM FASTCHIP BY ED WRIGHT,AUBERN POSI W/ RICHMOND 3.23 AND SPLINES,TUBE FRAME CONNEC
PST KIT.1LE BRAKE KIT! MANY MORE MODS FORESEEN IN MY ERA!13.38ET @ 106.75MPH
Thread Starter
Senior Member
Joined: Feb 2001
Posts: 559
Likes: 0
From: PORT RICHEY, FLORIDA
Car: 1983 Camaro Sport Coupe
Engine: 1986 305 C.I.D. Bored .030 over
Transmission: TH350 W/Shift Kit
Axle/Gears: 3:08
blinker fluid??!! what the heck are you talkin about we all know that its blinker bearings, unless you have the rare liquid cooled bearings.... anyway i checked everything and decided to just go ahead and replace it anyways and the car runs the same!!! that little rat bastard!! and he wont even admit he was wrong thats the worse part!!!
guess i ll just go back and switch the tail pipe fuses!!!
guess i ll just go back and switch the tail pipe fuses!!!
well i may be too **** about what i lock, but i try to be consistant and enforce the rules as dirk wants me to enforce them. if it's tech it's cool if it's not good chance it'll get locked. macgyvers board is for our non tech, it's not like you'd be going to someplace you weren't welcome. if any of you have a problem with a moderator write the moderator and/or dirk and see if you can resolve your problems.
TGO Founder/Former Owner

Joined: Jan 2000
Posts: 204
Likes: 0
From: Tucson, AZ USA
Car: 1992 GTA
Engine: L98
Transmission: T5
83CAMAROMAN,
We used to have a non-tech board on the site for people to post stuff just like this. Unfortunately, through the actions of several members, it is no longer here. There has to be a set of rules if everything on the site is to run smoothly. Thankfully, the moderators on the site do a great job of enforcing those rules.
In the future, if you have a disagreement with job that a moderator is doing, please bring it up to me in an email so it can be resolved.
Thank you.
We used to have a non-tech board on the site for people to post stuff just like this. Unfortunately, through the actions of several members, it is no longer here. There has to be a set of rules if everything on the site is to run smoothly. Thankfully, the moderators on the site do a great job of enforcing those rules.
In the future, if you have a disagreement with job that a moderator is doing, please bring it up to me in an email so it can be resolved.
Thank you.
Thread
Thread Starter
Forum
Replies
Last Post




