I need help putting a 350 together
07-19-2004, 05:41 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I need help putting a 350 together
Alright guys
I need a little bit of technical advise. I had a 91 z28 and two weeks ago I had a lady slam right into me. The car was pronounced totaled, but I'm keeping the car. I just picked up a 89 RS for 900 bucks. The body is mint but the 2.8 V6 is shot. Since I have all the parts of a z28, I am gooing to convert the RS into a 350 z28. I have all the parts to make the conversion from the old car. But I want to put some more power into the 350. Its going to have a T-5 tranny and 3:42 gears and I was think of adding a Cam, 1.6 roller rockers, Fast Burn Heads, and a Holley Ram Jet intake with 24 lb injectors. My biggest problem is that I do not know what kind of cam I should ut in. I was wondering if someone could help me out. I just dont understand all the lift and stuff. I'm not new when its comes to cars, But I new when it comes to the mechanics of the engine. Someone pleaseeee help me out. Thanks
I need a little bit of technical advise. I had a 91 z28 and two weeks ago I had a lady slam right into me. The car was pronounced totaled, but I'm keeping the car. I just picked up a 89 RS for 900 bucks. The body is mint but the 2.8 V6 is shot. Since I have all the parts of a z28, I am gooing to convert the RS into a 350 z28. I have all the parts to make the conversion from the old car. But I want to put some more power into the 350. Its going to have a T-5 tranny and 3:42 gears and I was think of adding a Cam, 1.6 roller rockers, Fast Burn Heads, and a Holley Ram Jet intake with 24 lb injectors. My biggest problem is that I do not know what kind of cam I should ut in. I was wondering if someone could help me out. I just dont understand all the lift and stuff. I'm not new when its comes to cars, But I new when it comes to the mechanics of the engine. Someone pleaseeee help me out. Thanks
Last edited by Iceman0502; 07-19-2004 at 05:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
