The gauge stopped working the other day right after i changed my spark plugs (that was fun) I remembered that there was a sender between the last 2 spark plugs on the pasenger side. While i was checking it out, the connector broke. No problem, got a new connector and a new "coolant sender" I think that the sender with the broken plug was for the fan. Where is the gauge sender?! I found a sender below the TB, but its not the same as the sender i bought. It has a 2 pin connector on it. I disconnected it, and i got a C?S code 13? I need my gauge back!!

------------------

• 89 Formula 305 WS6
  SFC's
  LCA's
  Spohn Panhard Bar
  Air Foil
  Flowmaster Cat Back
  Tranny Cooler
  A/F Ratio Meter (not a mod but it sure spurs interest)
  Trans Temp Gauge
  Most "Free" Mods
  3:73, Zexel Torsion Posi
• 90 Eagle Talon 2.0
  (Winter Beater)
  Mods? Um, no

 

Omega,

The CTS for the gauge should be at the left (driver's) cylinder head. The one at the front of the intake coolant crossover is for the ECM temperature reference.

------------------
Later,
Vader
------------------
"What a Day..."
Adobe Acrobat Reader

 

Thanks Vader! How many temp senders does this thing need!!

 

3. Guage sender is in drivers side head between cylinders 1 and 3, ECM sender is in manifold, and cooling fan switch is in passenger side head between the 6 and 8 cylinders.