Testing fuel pump
10-31-2004, 09:29 PM
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Elgin, IL
Posts: 3,085
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1997 Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73 IRS
Testing fuel pump
I have a GSS340 here that I bought used and I'd just like to see it run before I put it in..how much power do these draw? Can I just hook it up to 12V source and run water through it to check it out?
10-31-2004, 10:32 PM
#3
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Elgin, IL
Posts: 3,085
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1997 Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73 IRS
Yeah actually I had thought about that after I posted. Any idea what kind of current the Walbro 255lph high-pressure GSS340 will draw? I'm assuming I can just hook 12V straight up to the leads as marked +/-
10-31-2004, 10:36 PM
#4
TGO Supporter
Join Date: Sep 2003
Location: conway, s.c.
Posts: 6,127
Likes: 0
Received 8 Likes
on
8 Posts
Car: 1989 Iroc-Z
Engine: 5.7L TPI
Transmission: 700R4
You are correct in that assumption and I would suggest just running it long enough to insure that you have a good flow from it.
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM