TPI to carb
Junior Member
iTrader: (1)
Joined: Feb 2000
Posts: 66
Likes: 0
From: Coon Rapids, Minnesota, USA
Car: 85 Sport Coupe Camaro
Engine: 1969 Camaro 350
Transmission: TH350
Axle/Gears: 3.73 Posi
Hey if your going from TPI to carb would you be willing to sell me the TPI setup?
And as for the TPI to carb deal heres what you need....
good intake manifold
apropriate cfm sized carb
HEI distributor
another issue is the fuel pump. I just cut mine out and replaced it with a bend 3/8 line with a fuel sock on the end. Then I bought a carter mechanical fuel pump and bolted it up to the blcok and ran the fuel lines to it.
If you have any other questions feel free to email me I can go into more detail as I've done this quite a few times. IROCU26@hotmail.com
-Mike
[This message has been edited by IROCU69 (edited May 28, 2001).]
And as for the TPI to carb deal heres what you need....
good intake manifold
apropriate cfm sized carb
HEI distributor
another issue is the fuel pump. I just cut mine out and replaced it with a bend 3/8 line with a fuel sock on the end. Then I bought a carter mechanical fuel pump and bolted it up to the blcok and ran the fuel lines to it.
If you have any other questions feel free to email me I can go into more detail as I've done this quite a few times. IROCU26@hotmail.com
-Mike
[This message has been edited by IROCU69 (edited May 28, 2001).]
Thread
Thread Starter
Forum
Replies
Last Post
beachrodder
Tech / General Engine
7
Aug 25, 2015 08:05 AM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
Aug 17, 2015 02:00 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
