Tell me what these mods would do for my TIMES:
Thread Starter
Banned
Joined: May 2001
Posts: 940
Likes: 0
From: Hell, Michigan
Tell me what these mods would do for my TIMES:
What would an aluminum driveshaft do to my 1/4 mile and 0-60?
What would a full exhaust do to my times (Hooker headers, and catback w/cat)?
How about just a new open element filter?
What would I expect from all three mods?
------------------
1992 Pontiac Firebird (stock)
- 5.0L V8 TBI / Automatic Trans / Every option, excluding leather
- Killer car audio system:
What would a full exhaust do to my times (Hooker headers, and catback w/cat)?
How about just a new open element filter?
What would I expect from all three mods?
------------------
1992 Pontiac Firebird (stock)
- 5.0L V8 TBI / Automatic Trans / Every option, excluding leather
- Killer car audio system:
- Aiwa CDC-MP3 head unit
- Rockford Fosgate 360a2 amp
- pair of 12" MTX Thunder 5000s in a custom box
- Pioneer 3-way 6x9s, soon to add more more more!
Joined: Sep 1999
Posts: 1,496
Likes: 60
From: Danville, IN
Car: 1991 Camaro Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: Strange 12 Bolt, 3.42
Aluminum driveshaft- very little maybe .05 sec off your 1/4 mile
Hooker headers, and catback w/cat - This would wake your engine up probably .7 - 1.0 off your 1/4 mile
open element filter - This helps a little bit I'm guessing .1-.2 sec.
I'm not as familiar with TBI engines as I am carbed engines so maybe someone with a TBI car can give a better estimate but will all 3 mods I would guess you would drob about 1 sec off your 1/4 mile maybe a little more or less depending on the health and tuning of your engine.
------------------
best 1/4 mile so far: 13.4 @ 101mph
84 Camaro 305 ported & milled heads, 3 angle valve job, Edelbrock Performer RPM intake, Hedman full length headers, Accell ignition, Crane 274H cam, B&M 700R-4, 3000 stall speed, 4.10 gear,
M/T ET street tires
visit my website at http://www.geocities.com/jbenge/page1.html
Hooker headers, and catback w/cat - This would wake your engine up probably .7 - 1.0 off your 1/4 mile
open element filter - This helps a little bit I'm guessing .1-.2 sec.
I'm not as familiar with TBI engines as I am carbed engines so maybe someone with a TBI car can give a better estimate but will all 3 mods I would guess you would drob about 1 sec off your 1/4 mile maybe a little more or less depending on the health and tuning of your engine.
------------------
best 1/4 mile so far: 13.4 @ 101mph
84 Camaro 305 ported & milled heads, 3 angle valve job, Edelbrock Performer RPM intake, Hedman full length headers, Accell ignition, Crane 274H cam, B&M 700R-4, 3000 stall speed, 4.10 gear,
M/T ET street tires
visit my website at http://www.geocities.com/jbenge/page1.html
Thread
Thread Starter
Forum
Replies
Last Post