in the jegs catalog they have the zz4 350, its using 58cc heads with 1.94 intake and 1.50 exhaust valves, if i were to get a nice 350 shortblock would i be able to use my world products sr torquer 305 heads on it?

------------------
86 Camaro with 88 305 LB9 using 86 carb setup, edelbrock performer manifold, 305 S/R Torquer Heads, Hedman Headers, Crane Compucam 2032 edelbrock cat-back, gutted cat, slp underdrive pulley, mallory ignition, 305 h.o dual snorkel air cleaner, hypertech thermomaster chip,160 degree thermostat, 5-speed, 3.23 posi

95 Beretta Z26, 3100 V6, 4 Speed auto, stock

 

yes, From what I ahve heard they should work fairly well.

Just beware of compression ratio, It will be high with the 58CC chambers, and those are cast heads....


Or you could sell your SR's, and get some Vortec's




------------------
60 Ranchero - Project ( Money Hole )
85 Sport Coupe LG4 - Daily Driver 14.82 @ 91.1
Reader's ride -> My Ride

Just another Hot Rod kid, or thats what they all tell me.
Livin' the Stereotype