Need some help on TPI
Thread Starter
Member
Joined: Jan 2005
Posts: 291
Likes: 0
From: Illinois
Car: 1991 z28 camaro
Engine: 350 TPI bored .060 over
Transmission: 700R4
Need some help on TPI
Well my car seems to run fine 0-60 when i have it floored, but then at about 65 it kicks down and drops to like 2000 rpm and wont get any higher??
If you manually shift from OD to D, does the engine regain power?
If you temporarily disconnect the TCC connector, does the situation improve? You can try the same thing with the EGR solenoid, although you'll likely set an error code or two when you do it. You can clear those later, but it may help isolate the EGR.
If you temporarily disconnect the TCC connector, does the situation improve? You can try the same thing with the EGR solenoid, although you'll likely set an error code or two when you do it. You can clear those later, but it may help isolate the EGR.
Thread Starter
Member
Joined: Jan 2005
Posts: 291
Likes: 0
From: Illinois
Car: 1991 z28 camaro
Engine: 350 TPI bored .060 over
Transmission: 700R4
I dont know if it regains power after I do that, but it also was running perfect tonight, then it died...my battery/alternator **** is kind of messed up also.
Thread Starter
Member
Joined: Jan 2005
Posts: 291
Likes: 0
From: Illinois
Car: 1991 z28 camaro
Engine: 350 TPI bored .060 over
Transmission: 700R4
I mean it just all of the sudden died while i was in the process of whipping donuts(yeah that probably doesn't help) but my car doesn't seem to have any problems so i figured why not video tape some donuts then the **** died, and started right back up no problem then drove away with no trouble, ran perfect
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM








