will taking off the air pump on my car mess with the o2 sensor reading?

------------------
89 Rs camaro
305 tbi
3in flowmaster muffler
manderal bent pipe
no cat

 

no

 

NO.

------------------
FREE CARFAX Record Check

If you live in Southeastern US, check us out!
South East Thirdgen

GM Master Tech
ASE Master Tech + L1
Savannah, GA

'87 Trans Am
S/D TPI retrofit including functional PassKey,
22# injectors,
Whatever chip I feel like burning,
JET AFPR, Ported Plenum,
TB Coolant Bypass, Custom Cold Air,
SSM SFC, KYB Shocks, Boxed LCAs, Wonder Bar,
8mm Accel wires,
Flowmaster Exhaust,
16" GTA rims,
Corvette Servo,
3.73 Posi
4wheel Disc Brakes
Summit 1-5/8" headers, 2.5" Dynomax catback.

Best 1/8: 9.519@72.74

'97 Bonneville SSE

 

ok then what do i use to block off the air injection holes in the manifolds? or can i just bend the tubes over and pinch them?



------------------
89 Rs camaro
305 tbi
3in flowmaster muffler
manderal bent pipe
no cat

 

IF you do that you'll probably create exhaust leaks. I unscrewd them from the manifold and took one of the old fitting to the hardware store. I used that to find a brass plug which would fit in the manifold hole. I can't remember the exact size but I *think* it was 1/2.