Mechanical Fuel Return
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 52
Likes: 0
From: Brooks, AB Canada
Car: 82 Firebird
Engine: 5.0
Transmission: 3 speed auto
Mechanical Fuel Return
I swapped in a Edelbrock performer carb and performer intake manifold. I have Edelbrock single feed carb linkage, inline fuel pump and braided fuel line as well as a mr gasket fuel pump because i need AN from my braided line. the stock fuel pump only has two ports; in and out (duh). the one on my block has 3. what is the third one for? i did a search and it sounds like its some kind of emission line. Does this come from my canister or what? because i thought only efi systems needed a return line.
if i can block one of these off, does it matter which one?
if i can block one of these off, does it matter which one?
Last edited by duz; Apr 11, 2005 at 09:03 PM.
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 52
Likes: 0
From: Brooks, AB Canada
Car: 82 Firebird
Engine: 5.0
Transmission: 3 speed auto
forget it. i found /this thread and it answered everything. sorry for threadwaste
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
R3500
Engine/Drivetrain/Suspension Wanted
1
Aug 17, 2015 12:16 PM
