Where can i get emissions friendly performance parts for my 88 305 TPI. I know your gonnasay drop a 350 in but i already have one with a 350 TPI. So I just need to know where to get heads, headers etc. for my 305

 

I had the basic mods on my 305 before I yanked it for my 383. Start with intake and exhaust. Get emissions legal headers....I would suggest SLP or Edelbrock TES headers. I would also either change your muffler or get a complete cat-back. Also consider a cat if yours has a lot of miles on it. As far as the intake all I did was add K&N's and remove my MAF screens. Also consider upgrading your ignition. Get a good cap and rotor set....atleast Accel if not MSD. Also get good wires and plugs. If you really wanted to go overboard you could get an ignition box, but I don't feel it's necessary on a 305 with minor mods. The only other engine performance mod I had was an aftermarket chip. I had an ADS and it really wasn't that great, but it only cost me $100. Also it was advertised as emissions legal, but I failed when I had it installed....no big deal though because it took 10 minutes to remove it and go back to pass. Good luck with your mods.

------------------
Riccioli Performance Motorworks

--RPM Racing--

Getting there.....383 with Super Ram, Bosch 24# SVO's, MSD, Edelbrock 58 mm TB, 700R4 tranny, Eibach springs, Koni 12 way adjustable shocks and struts, and more!! Now let's pray it runs when it's all back together!!!!

 

If its a peanut cammed car, I'd be looking to change that cam at some time too. Aluminum Vette heads are a good option for the 305 if you want to change heads.

[This message has been edited by madmax (edited August 24, 2001).]