I am in the middle of installing my new engine and I need to install the tranny cooler lines. The engine and transmission are bolted into the car now. It is really awkward working with these things , and I was hoping that someone here has a diagram or something or can tell me how to route them. It is an 89 iroc with an L98 originally.
Thanks,
Mike

 

No diagram, but they route up the pass. side of the engine at about the oil pan rail level passing the engine mount on the inside. Once clearing the front engine accessories they have a few twists and turns but basically angle up towards the fittings at about a 45* angle- fairly stright shot.