I have a Griffin 2 row alum. radiator, the stock replacement w/ trans cooler. It's almost 2x as thick as the stock radiator, what'd you guys do to keep it in place? Just looking for some good ideas.

------------------
89 IROC-To see mods go to: http://www.geocities.com/buckeyeroc

 

I have the 3 row and I used my stock radiator cover to hold it in place, it doesn't fit perfect but it holds it in place.

------------------
'86 IROC
T-TOPS, TINTED WINDOWS, BRAKE LIGHT BLACKOUTS
GM GOODWRENCH 350
EDELBROCK TES HEADERS
3" Hooker CatBack w/Aero Chamber muffler
EDELBROCK 600CFM CARB.
KN AIRFILTER
ACCEL HEI DISTRIBUTOR
160* Stat
3:73 Posi
Rebuilt 700R4
B&M Megashifter, 5" Autometer Tach w/shift lite

 

mine is a becool. It has the little aluminum pieces that fit into the end tank slots that were in the old radiator hold down. I did have to modify it a bit to clear the spal fans.

 

ttt

------------------
89 IROC-To see mods go to: http://www.geocities.com/buckeyeroc

 

i changed to a smaller size on my car, had to change the mounting as well. all i did was use some flat steel bent at 90* and used selftapping sheet metal screws to hold the straps on and against the radiator, i used weather stripping on the straps to to act as a cousion between the radiator and the straps.

------------------
ICON Motorsports
1st & 3rd
MM Black Diamond 538 F&AM