Scorpion Roller Rockers
Thread Starter
Supreme Member
iTrader: (1)
Joined: Apr 2000
Posts: 1,108
Likes: 1
From: Baltimore, MD
Scorpion Roller Rockers
I have seen these all over ebay for a reasonable price...Has anyone ever heard of them. They look like they are quality rockers, but i just want to make sure.
Thanks alot
------------------
*1989 RS
*Red, Daytona Turbo fiberglass hood, chrome 16x8 IROC wheels
*355 CID
*TPI ported plenum, SLP siamesed runners, Edelbrock high flow intake
*SLP 1 and 3/4 headers with 3 inch catback being installed next week
*Richmond 3.73, Auburn Posi
*Modded 700-R4, 2800 stall converter
*eibach pro kit and hotchkis sturt tower brace
Thanks alot
------------------
*1989 RS
*Red, Daytona Turbo fiberglass hood, chrome 16x8 IROC wheels
*355 CID
*TPI ported plenum, SLP siamesed runners, Edelbrock high flow intake
*SLP 1 and 3/4 headers with 3 inch catback being installed next week
*Richmond 3.73, Auburn Posi
*Modded 700-R4, 2800 stall converter
*eibach pro kit and hotchkis sturt tower brace
Supreme Member
iTrader: (3)
Joined: Mar 2000
Posts: 1,287
Likes: 0
From: Warsaw, Indiana
Car: 1991 Firebird
Engine: 427 LSX
Transmission: Turbo 400
I saw a set at my speed shop. They looked pretty nice.
------------------
1991 Firebird
350 L98 (was a 305 TBI),T-5,Edelbrock TES and cat back,Accel manifold
NOS,subframes,jegster torque arm,MSD Digital 6
AFPR,Lakewood lcas
Hurst linelock,SLP cam (206 212 .480 .486),relocated battery,cold air,Hypertech chip,centerforce df,clutch
poly bushings and mounts
AFR 190s
Harland sharp 1.5 rockers
autopower rollbar
12.33 @ 114.83 juiced uncorrected
13.510 @ 102 non juiced uncorrected
------------------
1991 Firebird
350 L98 (was a 305 TBI),T-5,Edelbrock TES and cat back,Accel manifold
NOS,subframes,jegster torque arm,MSD Digital 6
AFPR,Lakewood lcas
Hurst linelock,SLP cam (206 212 .480 .486),relocated battery,cold air,Hypertech chip,centerforce df,clutch
poly bushings and mounts
AFR 190s
Harland sharp 1.5 rockers
autopower rollbar
12.33 @ 114.83 juiced uncorrected
13.510 @ 102 non juiced uncorrected
Supreme Member
Joined: Sep 2001
Posts: 6,111
Likes: 53
From: Ontario, Canada
Car: 1988 Firebird S/E
Engine: 406Ci Vortec SBC
Transmission: TH-350/3500stall
Axle/Gears: 7.5" Auburn 4.10 Posi-Traction
A friend of mine bought a set for his boat motor (350). Well if you know any thing about marine motors., on thing is for sure.
Any parts that last on a Hi-perf marine motor
is a good piece to say the least. I was a little leary 'cause I'd never heard of that brand. Well they were used for 2 yrs and out lasted 2 race motors and are still being used
on a vette. They seem to be bullet proof and
look good too.
http://photos.yahoo.com/russ_q
Any parts that last on a Hi-perf marine motor
is a good piece to say the least. I was a little leary 'cause I'd never heard of that brand. Well they were used for 2 yrs and out lasted 2 race motors and are still being used
on a vette. They seem to be bullet proof and
look good too.
http://photos.yahoo.com/russ_q
Thread
Thread Starter
Forum
Replies
Last Post
KO1
Engine/Drivetrain/Suspension Parts for Sale
16
Oct 15, 2015 05:00 PM
