Ok so Ive been trying to put my engine back in my car, and I marked all the sensors, but didnt mark any oif the brackets for the accesories on the front of the engine. If anyone has any pictures of the front of a V8 v-belt pulley system, I would be truely greatful becuase this project is taking way to long and I want to drive my car again! Thanks.

 

I'll try to dig a few pictures up, I just went through this, mixing up different and duplicate brackets. Ended up having to grind my power steering pump to make it fit somehow.

 

If this doesn't help let me know what area you need.

The middle section may be the best as it includes the PS bracket.

Sincerely,
Kurt

 

If you have headers you'll have to modify the A/C bracket (assuming you have A/C) to make it fit.

My son and I used a spacer and cut the right "Leg" completely off the bracket. I don't believe the integrity of the bracket was effected by the loss of one leg.

Sincerely,
Kurt

 

I didnt really have to vut oof the half of the bracket, but i had toi grinsd away some of the bracket to ,make it fit.

 

Thanks for the pictures of the brackets, really helpful. I did have to grind the AC bracket alot, but i managed to fit it without cuting and legs off. If anyone has any pictures of the passenger side brackets, that would make it so much easier! Thanks again