Thank you all for the help youve given me through this whole rebuild project of mine, its taken way too long. Im in the final phases and I need some more pics of engines. Any pics. If you have any engine with the v belt setup, carb and annd the emissions stuff still somewhat intact, please post some pics of your engine. I need pics of pass side brackets for the alternator and air pump, some pics of a good way to route my spark plug wires, and if possible, some pics of the vaccum tube routing. these things are giving me the most trouble and any help might make it possible to finish this week!

 

https://www.thirdgen.org/techbb2/sho...=&pagenumber=6

Pages 6 & 7 have what I believe you're looking for.

The '86/'87 flat multigroove pulleys/belt for alternator/water pump is the only difference, but the bracketry is all the same.

 

The good news is that we found the bag of blots for all the accessories. The bad news is I have no idea where they go, yay puzzles! Anyway, thanks for the link Five7, pretty helpful for a few things. Some things it didnt show was some vaccum routing, namely the small tubes in front of the carb, and the piece that I can only describe as "the black octopus thing that all the tubes go to that just kinda hangs there" If anyone could tell be where to put that, or whivh of the tubes go where, I would be extremely grateful! Thanks in advance for eveyones help!