Hyd roller cam for solid roller?
01-02-2006, 04:06 AM
#1
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Hyd roller cam for solid roller?
I called herbert performance about a solid roller for my 383. They stated that the cam I have in there right now is for a solid roller ,when I originally bought this cam for a hyd roller ( I ordered a small base circle =billet core). They asked for a part #(CH7) and stated if it's a billet core it's a solid roller 
. All this time I have been running a solid roller cam with hyd. roller lifters according to them. If this is the case and no damamge to valvetrain , it would be nice not having to swap the cam and just worry about the pushrods , lifters and springs. To good to be true?
. All this time I have been running a solid roller cam with hyd. roller lifters according to them. If this is the case and no damamge to valvetrain , it would be nice not having to swap the cam and just worry about the pushrods , lifters and springs. To good to be true? Last edited by Big454blockchevy; 01-02-2006 at 10:03 AM.
01-02-2006, 10:04 AM
#2
Senior Member
Thread Starter
Join Date: Dec 2000
Location: El Paso Texas
Posts: 640
Received 0 Likes
on
0 Posts
Car: 86 z28
Engine: Hyd. roller 498
Transmission: 700r4
Axle/Gears: 12 bolt 3.90 gears
Apparently that grind can be used as a solid or hyd. roller. 
I talked to their live help and they were able to recommend the valve springs for my cam grind. I love their customer service and products >>>>www.dougherbert.com
I talked to their live help and they were able to recommend the valve springs for my cam grind. I love their customer service and products >>>>www.dougherbert.com Last edited by Big454blockchevy; 01-02-2006 at 05:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
