rotor removal.
Thread Starter
Member
Joined: Jan 2006
Posts: 256
Likes: 0
From: yuma, az
Car: 91 camaro rs
Engine: 305 tbi
Transmission: 5 spd
Axle/Gears: what ever stock is
rotor removal.
so i'm in the process of changing my cap and rotor. i got to the rotor, and i cant pull it off. in the book it says there's two bolts holding it down, but i don't see them. the msd one i have, looks like it would just pull off. do i just need to put more force on the old ****, or is there more to it?
Senior Member
Joined: Aug 2001
Posts: 814
Likes: 2
From: San Jose, CA, USA
Car: 88 IROC-Z - original owner!
Engine: LB9 with K&Ns, MSD, Foil, Taylor
Transmission: WC T-5
Axle/Gears: BW 9-bolt, 3.45 posi
Which dizzy do you have? External coil or coil in cap? If you have external coil dizzy, you just pull up like hell on the rotor and it will pull off the shaft. Coil in cap dizzy the rotor is mounted with 2 screws clearly visible.
My car has the external coil dizzy and I usually just get the Accel cap and rotor package at the local Kragens. Works fine, never a problem.
My car has the external coil dizzy and I usually just get the Accel cap and rotor package at the local Kragens. Works fine, never a problem.
Thread
Thread Starter
Forum
Replies
Last Post
the_hamturdler
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 30, 2015 12:50 PM
the_hamturdler
Engine/Drivetrain/Suspension Parts for Sale
5
Sep 22, 2015 02:59 AM
