Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

stall

Thread Tools
 
Search this Thread
 
Old Jul 26, 2006 | 05:43 PM
  #1  
car86cars's Avatar
Thread Starter
Junior Member
15 Year Member
 
Joined: Jul 2006
Posts: 38
Likes: 1
stall

1986 camaro 305 tpi it stall form idle sometime it has it and sometime it don't does it hot or cold more hot than cold has new tps ,iac ,spark plugs , wire's ,fuel filter ,and rotor have put 4 mass air flow 3 used 1 new fuel pressure is @ 44 psi when key is on 38 psi @ idle
Reply
Old Jul 27, 2006 | 09:58 PM
  #2  
Jim 86 IROC's Avatar
Member
 
Joined: Jul 1999
Posts: 269
Likes: 0
From: SE, NY, USA
Car: 1988 Vette; 1988 IROC Z-28
Engine: 350cid; 305cid
Transmission: 700R/4; 700R/4
Axle/Gears: 2.59; 2.77
If you don't have a vacuum leak you likely need to set base idle and maybe setup the TPS low/high voltages; procedures are on my site.

Also, a leaking EGR valve can cause a similar symptom.
Reply
Old Jul 29, 2006 | 08:40 PM
  #3  
car86cars's Avatar
Thread Starter
Junior Member
15 Year Member
 
Joined: Jul 2006
Posts: 38
Likes: 1
tps is set at .54 and idles at 600 rpm
Reply
Old Jul 30, 2006 | 12:54 AM
  #4  
Jim 86 IROC's Avatar
Member
 
Joined: Jul 1999
Posts: 269
Likes: 0
From: SE, NY, USA
Car: 1988 Vette; 1988 IROC Z-28
Engine: 350cid; 305cid
Transmission: 700R/4; 700R/4
Axle/Gears: 2.59; 2.77
Do you detect a vacuum leak before or after it warms up?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
darwinprice
Organized Drag Racing and Autocross
17
Oct 11, 2015 11:51 PM
HoosierinWA
Tech / General Engine
5
Oct 7, 2015 10:15 AM
Jlanz55
TPI
2
Sep 29, 2015 08:55 AM
lanceflame44
Tech / General Engine
0
Sep 25, 2015 12:28 PM
amcnellis
TBI
6
Sep 16, 2015 04:16 PM




All times are GMT -5. The time now is 11:12 AM.