Serpentine Setup

Subscribe
Sep 21, 2006 | 07:15 PM
  #1  
I bought a serpentine setup from another member on these boards and all I need is a belt and the bolts but I have a few questions.

Im not running smog pump or Ac so I can just use A smaller belt instead of getting 2 delete pulleys? I just clicked the Alternator/ Power steering belt on summits site so Im assuming thats all i need right?

Question 2, What bolts do I need? I found the water pump bolts but dotn know if I have the short water pump or the long one. Do I just have to buy each bolt for the alternator/ power steering pump individually bc I couldnt find a kit that included those on summits site?

Thanks for answering my dumb questions lol

Steven
Reply 0
Sep 23, 2006 | 01:35 AM
  #2  
ttt ???
Reply 0
Sep 25, 2006 | 08:37 PM
  #3  
ttt nobody knows?????
Reply 0
Sep 25, 2006 | 10:30 PM
  #4  
I have never done this specific conversion so I can't help much. To answer one of your questions I'm pretty sure that our cars have the long water pump. However I believe you will need to change your water pump (install one off of a serpentine set up car) as it will be rotated differently.
Reply 0
Sep 25, 2006 | 11:25 PM
  #5  
correct. buy a reverse rotation (88 or newer?) pump since you're using a serp setup
Reply 0
Sep 26, 2006 | 12:03 AM
  #6  
Yea I got the water pump with the setup I bought thanks. Now what bolts to get for the alt. and ps pump?
Reply 0
Subscribe