Serpentine Belt route
Thread Starter
Junior Member
Joined: Nov 2005
Posts: 35
Likes: 0
From: Mesa Az
Car: Camaro z28 1500 Truck Honda CBR900rr
Engine: 305 HO.
Transmission: 350 turbo
Serpentine Belt route
Hi guys I have an 89 Camaro with a 305 that has the serpentine setup.. Heres the bad news the engine compartment does not have the diagram for how to route the serpentine.. Could someone post the diagram for me. plus I need the water pump for this too. Its missing from the car... What part number is it and is it a reverse rotation pump?
Thanks everyone.
Thanks everyone.
Joined: Jul 1999
Posts: 10,950
Likes: 27
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
There are three pictures here:
https://www.thirdgen.org/serpentine/
They dont show the smog pump but the belt would go to the left of its pulley.
Yes you need a reverse rotation water pump. You can get the part number from your favorite auto parts store's website, or go into the store and ask.
https://www.thirdgen.org/serpentine/
They dont show the smog pump but the belt would go to the left of its pulley.
Yes you need a reverse rotation water pump. You can get the part number from your favorite auto parts store's website, or go into the store and ask.
Thread
Thread Starter
Forum
Replies
Last Post









