Need some cam advice
Thread Starter
Member
iTrader: (3)
Joined: Jun 2003
Posts: 329
Likes: 0
From: Newmarket, NH
Car: 91Z28
Engine: 305
Transmission: WC T-5
Axle/Gears: 10 Bolt Posi, 3.08
Need some cam advice
Hey all, I am looking to get some advice on a new cam for my 355. Here is what it has:
2pc RMS
Basically stock lower end with new KB flat top pistons
World Products Sportsman II's (64cc chambers)
Hedman shorties with 3" exhaust
Performer RPM
Holley 600
WC T-5
10 Bolt with 2.73's (upgrading to 3.73's in the spring)
I am looking for something that makes good power but can still handle the brakes. Let me know what you all think. Thanks!
Bill
2pc RMS
Basically stock lower end with new KB flat top pistons
World Products Sportsman II's (64cc chambers)
Hedman shorties with 3" exhaust
Performer RPM
Holley 600
WC T-5
10 Bolt with 2.73's (upgrading to 3.73's in the spring)
I am looking for something that makes good power but can still handle the brakes. Let me know what you all think. Thanks!
Bill
Thread
Thread Starter
Forum
Replies
Last Post
Hello, Michael
Engine Swap
8
Aug 20, 2015 03:19 PM