how to identify NEW afr eliminators
Thread Starter
Member
iTrader: (2)
Joined: Feb 2004
Posts: 412
Likes: 0
From: okotoks Alberta
Car: 1991 Camaro RS
Engine: 406ci
Transmission: T-56 LT1
Axle/Gears: 3.42
how to identify NEW afr eliminators
going to look at brand new in the box heads
buddy says they are the 1034x which is AFR 195 heads, I want to ensure that these are the NEW ELIMINATOR heads. anyway to verify that?
I see them listed as 1034*
cheers
blake
buddy says they are the 1034x which is AFR 195 heads, I want to ensure that these are the NEW ELIMINATOR heads. anyway to verify that?
I see them listed as 1034*
cheers
blake
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
LB9GTA posted some pic's in this thread:
https://www.thirdgen.org/forums/afte...low-bench.html
RBob.
https://www.thirdgen.org/forums/afte...low-bench.html
RBob.
Supreme Member
iTrader: (4)
Joined: Feb 2000
Posts: 2,850
Likes: 0
From: Winston salem, NC
Car: 1987 1SICIROC.....1999 TransAm
Engine: 385 HSR.....LS1
Transmission: 700R4 with Midwest 3400 2.4str...M6
Axle/Gears: SLP Zexel Posi unit 3.42's...3.73's
Ive got a set of the NEW #1040 195's ..you could also measure the intake valve...it should be 2.050 for the NEW..the old 195's had the 2.020 valves.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
1034, 195, 2020, 2050, afr, eliminator, eliminators, head, heads, identification, identify, identifying, indentify, upgrade, valves
