i replacen my engine with a 350 ond i didnt go back with the a/c parts because my condensor coil broke when i was undoing the line.no im wanting to go back with the parts that i dont have and dont know what all i need.i took everything out from the black thing in the far left of the first picture right above the strut tower to the condensor.obviosly i need the condensor and the dryer.but what else do i need as far as the lines.like what are they called and is everything avaliable at the local parts store.the compressor is still in place.

 

Besides the 2 parts you mentioned, You'll need the accumulator, the low pressure switch (just out of picture frame), and the compressor hose assembly. They are all available at a good parts store. See picture.

 

so is the low pressure switch the only thing thats hooks to a wiring harness.because when i took everything out i remember un hooking a plug(s).

 

Unless you took out the liquid line shown in your second picture. It has the high pressure switch in it and it is still connected in the picture. There is a switch on the back of the compressor, but it should still be connected also.

 

I took the A/C out of my car and have what ever you need to complete your system. I will take any reasonable offer plus shipping for the parts.

thx

jeff