Some questions about replacing all the vacuum lines
Thread Starter
Member
Joined: Oct 2004
Posts: 189
Likes: 0
From: Indiana
Car: 1992 Camaro Z28
Engine: 5.7 TPI L98
Transmission: 700R4
Axle/Gears: 3.23
Some questions about replacing all the vacuum lines
Is there a kit that I can buy that has all the lines or should I just buy a reel and cut each one to length. Thanks for any help.
Joined: Sep 2005
Posts: 27,946
Likes: 2,460
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Some questions about replacing all the vacuum lines
No "kit" that I know of, there being a HUGE variation from one model of car to another.
THere are a number of different sizes. You'll probably also find some that have a different size at each end, which mostly rules out using bulk rubber hose. I'd suggest taking them off and going to the store and matching them up, using the plastic line and the rubber ends that come on cards.
THere are a number of different sizes. You'll probably also find some that have a different size at each end, which mostly rules out using bulk rubber hose. I'd suggest taking them off and going to the store and matching them up, using the plastic line and the rubber ends that come on cards.
Thread Starter
Member
Joined: Oct 2004
Posts: 189
Likes: 0
From: Indiana
Car: 1992 Camaro Z28
Engine: 5.7 TPI L98
Transmission: 700R4
Axle/Gears: 3.23
Re: Some questions about replacing all the vacuum lines
Yea I was looking under the hood and its just a mess of different sizes. It tough finding a place to get started.
Joined: Sep 2005
Posts: 27,946
Likes: 2,460
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Some questions about replacing all the vacuum lines
Pick one. I suggest either the one that's in worst shape, or that's hardest to get to.
Start there.
Pick another.
And another.
Presently, they'll all be done.
Start there.
Pick another.
And another.
Presently, they'll all be done.
Joined: Feb 2002
Posts: 3,462
Likes: 4
From: N. Illinois
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: Some questions about replacing all the vacuum lines
The off-the-shelf kits you'd find at Autozone have about 95% of the vacuum line you'd need. I was only short on the PCV line. 10mm on ebay is what I got for that.
Thread
Thread Starter
Forum
Replies
Last Post