Cylinder Heads
Thread Starter
Junior Member
Joined: Apr 2007
Posts: 47
Likes: 0
From: Syracuse, New York
Car: 1986 Camaro Iroc-z
Engine: 305 TPI
Transmission: 700r4 w/ custom shift kit
Cylinder Heads
Well i've been taking apart my engine to find out the reason why it was smoking so much out of the exhaust, and the heads and gasket were shot, i was wondering if there was any way i could buy new aftermarket aluminum heads that would fit up exactly like the stock heads off my 305 TPI
1986 Iroc-z 305 TPI -work in progress
1986 Iroc-z 305 TPI -work in progress
TGO Supporter
Joined: Oct 2002
Posts: 9,067
Likes: 1
From: Saskatoon, SK, Canada
Car: '83 Z28, '07 Charger SRT8
Engine: 454ci, 6.1 Hemi
Transmission: TH350, A5
Axle/Gears: 2.73 posi, 3.06 posi
Re: Cylinder Heads
Any of them should... I see no reason they wouldn't. If its a 305 though, avoid heads with bigger than 1.94/1.60 valves and anything over 60cc chambers.
Trickflow actually makes a really good head for the 305. Its a 175cc aluminum head with 56cc chambers, 1.94/1.50 valves. They are designed with the small-bore blocks in mind.
Trickflow actually makes a really good head for the 305. Its a 175cc aluminum head with 56cc chambers, 1.94/1.50 valves. They are designed with the small-bore blocks in mind.
Thread
Thread Starter
Forum
Replies
Last Post
Chuck84TA
Engine/Drivetrain/Suspension Parts for Sale
10
Jul 15, 2016 09:05 PM
NinjaNife
Tech / General Engine
27
Aug 23, 2015 11:49 AM
