Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Starting Issues

Thread Tools
 
Search this Thread
 
Old Sep 17, 2007 | 09:43 PM
  #1  
ghettosnowman's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 13
Likes: 0
Car: 1988 Iroc-Z
Engine: 350
Transmission: 4L60E
Starting Issues

I have a 1988 Iroc-Z, with a pretty much stock 350 (with about 232,xxxkm's). Every time that I start the engine when it is cold, i need to crank it at least 3 times and then it finally starts. Now, that's not the only issuse. The car might start on the first or second tip, but it only runs for a few seconds and then it dies....and when you finally do get it started after the 2nd or 3rd tip, it sputters. The idle lopes between about 0 - 700rpm and then smooths out after about 30 seconds. Now, when you give it throttle, even a small amount, it sputters violently again. It is possible to get the car moving and once you get up to about 10mph there is no real issue unless you try to give it more than about 1/3 throttle. But it still sputters violently every time you give it gas. As soon as the engine gets to operating temperature there are no more issues at all. Well, it sputters any time that you punch the throttle, but no issuse if you slowly or even somewhat quickly depress the gas pedal. I think it's just the fuel injectors for that part, but I have no clue what to do about the starting issue. The starting issues only happen when the engine is cold. Not justcool, but sitting for 8 hours like when i'm at work. I live in Vancouver, BC, Canada, We get moderate temperature here. Lately the temp. has been around 23 celsius.

Thanks for you help in advance!
~ Cam

Last edited by ghettosnowman; Sep 18, 2007 at 01:04 AM.
Reply
Old Dec 28, 2007 | 09:42 PM
  #2  
ghettosnowman's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 13
Likes: 0
Car: 1988 Iroc-Z
Engine: 350
Transmission: 4L60E
Re: Starting Issues

Still having this problem. Does anyone have any ideas?
Reply
Old Dec 28, 2007 | 10:58 PM
  #3  
cooter26's Avatar
Member
iTrader: (1)
 
Joined: May 2007
Posts: 247
Likes: 0
From: Gulfport MS
Car: 83 Camaro
Engine: 383
Transmission: T5
Axle/Gears: 4th gen 10 bolt 3:42 POSI
Re: Starting Issues

are you showing any codes? sounds like a bad sensor, either MAT/IAT or ECT sensors arent making the ECM idle up your car on initial start up.
Reply
Old Dec 29, 2007 | 09:58 PM
  #4  
BulliTooth's Avatar
Member
 
Joined: Jun 2004
Posts: 295
Likes: 0
From: Michigan
Car: 1989 Formula
Engine: L98
Transmission: 700R4
Axle/Gears: 9 bolt GW6
Re: Starting Issues

Originally Posted by cooter26
are you showing any codes? sounds like a bad sensor, either MAT/IAT or ECT sensors arent making the ECM idle up your car on initial start up.
sorry but what is the IAT sensor? im having some of the same problems.
Reply
Old Dec 29, 2007 | 10:40 PM
  #5  
slow_90firebird's Avatar
Senior Member
 
Joined: Jul 2007
Posts: 1,461
Likes: 1
From: Manchester, CT + Nashua, NH
Car: 90 Firebird Formula
Engine: LO3
Transmission: T5
Axle/Gears: 3.08 one wheel peel
Re: Starting Issues

It would be worth the time to check the cap and rotor, and probably some other ign parts too!
Reply
Old Dec 30, 2007 | 09:04 PM
  #6  
ghettosnowman's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 13
Likes: 0
Car: 1988 Iroc-Z
Engine: 350
Transmission: 4L60E
Re: Starting Issues

No codes showing. Cap and rotor look fine.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frozer!!!
Camaros for Sale
35
Jan 19, 2024 04:55 PM
Orr89RocZ
Power Adders
206
Apr 25, 2016 08:28 AM
Bryan F
Tech / General Engine
2
Aug 18, 2015 02:28 PM
IroczFan
Carburetors
1
Aug 18, 2015 05:19 AM
86Base
TPI
14
Aug 8, 2015 01:34 PM




All times are GMT -5. The time now is 03:53 PM.