Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Car Won't Start, Clicking Sound? Please Help!

Thread Tools
 
Search this Thread
 
Old Nov 26, 2007 | 01:20 PM
  #1  
xGR1Mx's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2007
Posts: 48
Likes: 0
Car Won't Start, Clicking Sound? Please Help!

hey everybody, i recently finished installing a Weiand Action Plus intake. Not too long ago i put the battery booster on the car, gave it a crank.. and i saw the alternator begin moving slowly, but then I got a rapid clicking noise coming from somewhere? My car won't start now, I just keep getting that noise. I hear it struggling to start, trying to turn over, but then I get the click. One thing that i didnt put in yet is the bolt with 2 wires that bolts into the alternator. looks like to ground the wires. Help me out guys, thanks in advance!
Reply
Old Nov 26, 2007 | 03:51 PM
  #2  
Fullsizewagon's Avatar
Senior Member
 
Joined: Jul 2006
Posts: 609
Likes: 0
From: Oslo, Norway
Engine: '85 Monte SS L69 305
Transmission: TH 200-4R
Axle/Gears: 3.23
Re: Car Won't Start, Clicking Sound? Please Help!

Your battery is shot.
Reply
Old Nov 26, 2007 | 03:59 PM
  #3  
xGR1Mx's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2007
Posts: 48
Likes: 0
Re: Car Won't Start, Clicking Sound? Please Help!

Just to clear up any confusion, this is the bolt I am talking about:



----------
If that is the case, do you think i need a completely new battery? Or can i get it started with the battery booster? Also, any idea where that bolt goes in? Thanks in advance

Last edited by xGR1Mx; Nov 26, 2007 at 04:01 PM. Reason: Automerged Doublepost
Reply
Old Nov 26, 2007 | 09:26 PM
  #4  
five7kid's Avatar
Moderator
25 Year Member
iTrader: (14)
 
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
'87 TBI? Never heard of it. What's the 8th character of the VIN?

That bolt usually goes to the intake manifold, typically the thermostat housing.
Reply
Old Nov 26, 2007 | 10:25 PM
  #5  
copperhead110's Avatar
Member
 
Joined: Sep 2002
Posts: 171
Likes: 0
From: Seattle, WA
Re: Car Won't Start, Clicking Sound? Please Help!

If you are absolutely sure where that bolt goes, reinstall it.
Make sure the cables are connected well to the battery.

Your battery may not fully charged. The battery could be a gonner too.

Can you start it with jumper cables from another car?

I've never used a battery booster. How well does that work?

How was the car doing before you installed the intake?
How long has it been since you used the car?

Last edited by copperhead110; Nov 26, 2007 at 10:38 PM.
Reply
Old Nov 27, 2007 | 12:21 AM
  #6  
online170's Avatar
Supreme Member
 
Joined: Sep 2005
Posts: 1,951
Likes: 13
From: Ottawa, ONT
Car: 1987 Firebird
Engine: 355
Transmission: T56
Re: Car Won't Start, Clicking Sound? Please Help!

Bad ground, or bad battery.

If youre sure the battery good you have a bad ground.

1 click i usually a ground issue. Sometimes itll start out of nowhere.
Lots of clicks means low/dead battery.

Put the bolt back in, see if its any better, and lubricate your ground points (not on the battery, but battery to ground, engine to chassis). WD40 works fine.
Reply
Old Nov 27, 2007 | 05:44 PM
  #7  
xGR1Mx's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2007
Posts: 48
Likes: 0
Re: Car Won't Start, Clicking Sound? Please Help!

Hey guys. Thanks for the help.. I got a new battery and the car started. only thing is, it was kinda jumpy.. and it seemed like smoke was coming out of a fitting in the back of the manifold? It screws in and then has a little pipe that sticks out, im guessing a hose is to run to it. Truth is, I didnt pay enough attention with some of the hoses.. Also, theres a hose that branches out from the two coolant hoses that run over the passenger valve cover.. I dont know where that goes. Here are some of the hoses i'm not sure about.

That's an old picture.. When I started the car, it was jumpy, and i was hearing "pop-po-popop" coming from my exhaust, so I shut the car off. I also have to replace the vacuum line that broke off the back of my carb.

Any ideas will be much appreciated, I want my beast back!
Thanks everyone.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
midge54
LTX and LSX
21
Dec 27, 2019 04:14 PM
Brcharrelson
TPI
15
Aug 26, 2015 07:47 PM
B_Dubya
Transmissions and Drivetrain
3
Aug 26, 2015 05:09 PM
justin57
TBI
30
Aug 20, 2015 07:05 PM
killer777
Tech / General Engine
0
Aug 8, 2015 02:47 PM




All times are GMT -5. The time now is 06:06 AM.