Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Mass Air Flow Problem... Any Ideas?

Old Aug 11, 2008 | 05:04 PM
  #1  
vante@qwest.net's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 7
Likes: 0
Mass Air Flow Problem... Any Ideas?

I have an '89 firebird, 2.8L, and whenever I try to accelerate, the engine has major hesitation problems.
If I disconnect the MAF, it runs great…
I have already replaced both the sensor and it’s relay….
Any ideas?
Thanks for the help!
Joe
Reply
Old Aug 14, 2008 | 04:11 PM
  #2  
IROC86CAM's Avatar
Junior Member
 
Joined: Jun 2005
Posts: 15
Likes: 0
From: PENNSYLVANIA
Car: 86 IROC
Engine: 305 TPI
Transmission: 700R4
Re: Mass Air Flow Problem... Any Ideas?

If you need a new one, go to Micro-Tech Automotive Inc in Louisville Ky. I ate four then got this no ploblems in 3 years with it.
Reply
Old Jun 2, 2012 | 04:51 PM
  #3  
unfeelagirl27's Avatar
Junior Member
 
Joined: May 2012
Posts: 1
Likes: 0
From: Bartlesville, Ok
Car: 89 Pontiac Firebird
Engine: 2.8 V6
Transmission: automatic
Re: Mass Air Flow Problem... Any Ideas?

i al trying to locate the mass air flow relay and burn off on my 89 firebird 2.8 and i cant find the part number or where they are at. thanks
Reply
Old Jun 2, 2012 | 05:28 PM
  #4  
paulo57509's Avatar
Supreme Member
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 3,178
Likes: 48
From: Tracy, CA
Car: '87 IROC
Engine: LB9
Transmission: TH700R4
Re: Mass Air Flow Problem... Any Ideas?

Originally Posted by unfeelagirl27
i al trying to locate the mass air flow relay and burn off on my 89 firebird 2.8 and i cant find the part number or where they are at. thanks
Have you tried Rock Auto? I think they have the relay. I didn't see a burn-off relay; unless their the same thing.

http://www.rockauto.com/

BTW, you might get a better response by starting a new thread.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
chazman
Tech / General Engine
8
Aug 28, 2018 03:25 PM
Keith5
DFI and ECM
2
Aug 27, 2015 04:37 PM
chazman
TPI
0
Aug 22, 2015 02:01 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:10 PM.