What for are these (2)
Thread Starter
Junior Member
Joined: Oct 2007
Posts: 34
Likes: 0
Engine: 350
What for are these (2)
Hi,
The second question is I found vacuum line disconnected found from this unit
going to this place of TBI carb:
Again on my friends Camaro 1991 this vacuum line was connected, on mine Camaro 1991 (350 TBI) the line was disconnected and closed.
The question is what for is this unit and must it be connected to the TBI carb or not?
Thanks again for the help
The second question is I found vacuum line disconnected found from this unit
going to this place of TBI carb:
Again on my friends Camaro 1991 this vacuum line was connected, on mine Camaro 1991 (350 TBI) the line was disconnected and closed.
The question is what for is this unit and must it be connected to the TBI carb or not?
Thanks again for the help
Senior Member
iTrader: (1)
Joined: Jul 2007
Posts: 1,141
Likes: 2
From: MA
Car: '87 IROC/'68 SS
Engine: 5.7L/350
Transmission: 700R4/Muncie 4-spd
Axle/Gears: 3.27 9 bolt / 3.31 12 bolt
Re: What for are these (2)
The device in the top pic looks like the EGR control solenoid.
Member
Joined: Jan 2008
Posts: 112
Likes: 0
From: Fort Worth, Texas
Car: 1991 RS Vert
Engine: LO3, 305, TBI
Transmission: 700R4
Axle/Gears: 3.42
Re: What for are these (2)
That is pretty much a loaded question...
EGR means Exhuast Gas Recirculation. The solenoid is what controls the EGR valve so it can open and close... do its job.
As for whether you need it or not depends on your state/county and the local emissions laws.
EGR means Exhuast Gas Recirculation. The solenoid is what controls the EGR valve so it can open and close... do its job.
As for whether you need it or not depends on your state/county and the local emissions laws.