Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

HELP!!!!!!

Thread Tools
 
Search this Thread
 
Old Oct 13, 2008 | 06:23 PM
  #1  
SLS85IROC's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2008
Posts: 8
Likes: 0
From: brockton. MA
Car: camaro IROC-Z28
Engine: V8 350 5.0 TPI
HELP!!!!!!

i am missing my anti polution pump and a belt in the engine and my car stalls when its ideling now will that cause to do this also where does the pump go to i am gettin a new one tomoro i kno where it connects to but i dont know where it goes from there can anyone help??
Reply
Old Oct 13, 2008 | 07:31 PM
  #2  
jeffcj's Avatar
Member
iTrader: (3)
 
Joined: Sep 2007
Posts: 191
Likes: 0
Re: HELP!!!!!!

On a serpentine setup the pump mounts on the passenger side of the engine just below the A/C compressor. If it is missing you will see the bracket for it.

However, it being missing would not cause the car to stall. It should have no impact on the engine running at all.
Reply




All times are GMT -5. The time now is 11:47 PM.