Where does this hose go????
Thread Starter
Member
Joined: Jun 2007
Posts: 128
Likes: 0
From: Humble,Texas
Car: 91 CAMARO Z28
Engine: 5.8L TPI 355 L98
Transmission: 700R4
Axle/Gears: 3.23
Where does this hose go????
These are a few hoses on the right side of my motor.(350 tpi) i dont know where these vacuum hoses connect to. Any help is appreciated.
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: Where does this hose go????
i think its to your heater control valve if you need more help ask
Thread Starter
Member
Joined: Jun 2007
Posts: 128
Likes: 0
From: Humble,Texas
Car: 91 CAMARO Z28
Engine: 5.8L TPI 355 L98
Transmission: 700R4
Axle/Gears: 3.23
Re: Where does this hose go????
well i know that the two hoses are pretty close together. One has two hoses on it 1 which goes to the fpr and the other i dont have a clue. Now there is a rubber hose comeing from the canister that runs down the drivers side behind the motor but i dont know what that hooks up to.
Senior Member
Joined: Nov 2001
Posts: 915
Likes: 2
From: Erlanger, KY
Car: 1989 Iroc-z
Engine: 350 TPI
Transmission: Auto 700R4
Axle/Gears: 9 bolt - 2.77
Re: Where does this hose go????
Your first pic, the plastic line laying on the runner will snake its way under the plenum to the throttle body. There is a vacuum port under the throttle body on the driver side it connects to. The other plastic line in your first pic that I see which is laying up against the coil will connect to the vacuum port under the map sensor. It is for the heater controls in the car. Should be a check valve/splitter that will connect with it. Cant see what your pointing at in the second pic. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
2012sergen11
Engine/Drivetrain/Suspension Wanted
6
Oct 13, 2015 07:38 PM