Summit digital CD Ignition (PN SUM-850602) install help
Thread Starter
Junior Member
Joined: Jul 1999
Posts: 83
Likes: 0
From: Portland, ME, USA
Axle/Gears: 2.73
Summit digital CD Ignition (PN SUM-850602) install help
I tried searching but didn't find enough detail ...
I am electrically challenged! I am unsure how to hook this thing up. I have an 88 5.7TPI with coil separate from the distributor. I asume the correct diagram in the manual is the one for "dual connection coil HEI system" but am not sure of some of the connections. It also looks like I will have to cut some wires. Was hoping for a full plug in deal. Anyone got any pictures that would help? Any tips on how to tell what the tach wire is? How about the pink wire from the ignition? I guess I am looking for install for Dummies ... please help!
I am electrically challenged! I am unsure how to hook this thing up. I have an 88 5.7TPI with coil separate from the distributor. I asume the correct diagram in the manual is the one for "dual connection coil HEI system" but am not sure of some of the connections. It also looks like I will have to cut some wires. Was hoping for a full plug in deal. Anyone got any pictures that would help? Any tips on how to tell what the tach wire is? How about the pink wire from the ignition? I guess I am looking for install for Dummies ... please help!
Last edited by Kurt88IROC; Jul 2, 2009 at 09:42 AM.
Thread
Thread Starter
Forum
Replies
Last Post
tartagliaz28
Engine/Drivetrain/Suspension Wanted
0
Aug 15, 2015 10:59 AM
