will AFR 195's eliminators have intake ports not match manifold?
Thread Starter
Member
Joined: Dec 2008
Posts: 145
Likes: 0
From: So Pasadena, CA
Car: 1989 Chevy Corvette
Engine: 383 SuperRam 10.7 AFR 195 220/229
Transmission: Fancy Smansy 87 Corvette 700r4
Axle/Gears: 3.33
will AFR 195's eliminators have intake ports not match manifold?
1989 L98
my engine builder had a problem bridging the 2 heads with the super ram manifold, so my shop redid it
and now i think it is yet again not sealing, is that "V" area further apart with those heads that my 113 stock aluminum heads or stock heads for that matter?
has anyone heard of using double intake gaskets to address this problem if even there is a problem?
my engine builder had a problem bridging the 2 heads with the super ram manifold, so my shop redid it
and now i think it is yet again not sealing, is that "V" area further apart with those heads that my 113 stock aluminum heads or stock heads for that matter?
has anyone heard of using double intake gaskets to address this problem if even there is a problem?
Senior Member
Joined: Jun 2008
Posts: 660
Likes: 1
From: Corning NY
Car: 86' IROC
Engine: 388
Transmission: Built 700r4
Axle/Gears: 3.08 non-posi
Re: will AFR 195's eliminators have intake ports not match manifold?
are they vortec heads or is the intake vortec? If one is vortec the other has to be vortec.
Thread Starter
Member
Joined: Dec 2008
Posts: 145
Likes: 0
From: So Pasadena, CA
Car: 1989 Chevy Corvette
Engine: 383 SuperRam 10.7 AFR 195 220/229
Transmission: Fancy Smansy 87 Corvette 700r4
Axle/Gears: 3.33
Re: will AFR 195's eliminators have intake ports not match manifold?
afr 195 street heads and super ram intake
Joined: Feb 2002
Posts: 3,462
Likes: 4
From: N. Illinois
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: will AFR 195's eliminators have intake ports not match manifold?
Don't know about the SR but my AFR Eliminators had no issues sealing with my TPiS base.
Thread Starter
Member
Joined: Dec 2008
Posts: 145
Likes: 0
From: So Pasadena, CA
Car: 1989 Chevy Corvette
Engine: 383 SuperRam 10.7 AFR 195 220/229
Transmission: Fancy Smansy 87 Corvette 700r4
Axle/Gears: 3.33
Joined: Feb 2002
Posts: 3,462
Likes: 4
From: N. Illinois
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: will AFR 195's eliminators have intake ports not match manifold?
For the intake manifold gasket I used Fel-Pro 1205.
For the head gaskets I used Fel-Pro 1094.
It fit right the first time.
For the head gaskets I used Fel-Pro 1094.
It fit right the first time.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
Nov 14, 2015 12:02 AM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
