Error Code 34 help
#1
Member
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Bridgeville, PA
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350
Error Code 34 help
88 GTA 350 my car is giving me this error code, how can i fix it, and what does it mean. i am familiar with MAF sensor, but does it mean it need replaced.
Error Code: 34 Low voltage (high vacuum) at mass air flow sensor (or MAP sensor)
Error Code: 34 Low voltage (high vacuum) at mass air flow sensor (or MAP sensor)
#2
Member
Join Date: Apr 2007
Location: Niagara Falls
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Firebird Formula WS6
Engine: 305 tpi lb9
Transmission: 5 speed
Axle/Gears: 3.45
Re: Error Code 34 help
I bought my car from the original owner with all receipts from day 1. This code was on about 6 of them. The maf was replaced twice and ecu was replaced once. I still had the code for a while. I checked all the wires continuity test from ecu to sensor and checked the burnoff relay. then i backprobed the maf to see the readings at idle and if they increased. I beleive it was around a half volt at idle and increased with throttle. Everything was good from my view so I priced a new sensor anyway but never replaced it since it is around 300. Now I havent had the code in a couple years.
I had read online somewhere that the manufactures of the maf sensor had the wrong blueprints and did not agree with the ecu. who knows how tru this is.
I would like to hear if anyone else has chased this code before?
I had read online somewhere that the manufactures of the maf sensor had the wrong blueprints and did not agree with the ecu. who knows how tru this is.
I would like to hear if anyone else has chased this code before?
Thread
Thread Starter
Forum
Replies
Last Post