Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

What was your "DUH" moment while working on your car??

Thread Tools
 
Search this Thread
 
Old Mar 2, 2010 | 05:03 PM
  #1  
CassieMarie88's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2009
Posts: 52
Likes: 0
From: Lima, Ohio
Car: 88 Camaro RS/88 Camaro RS
Engine: 2.8 V6/1975 350 4 bolt main
Transmission: Manuel/Automatic
Axle/Gears: Factory/After Market
What was your "DUH" moment while working on your car??

I know this post isn't really that informational but I just had a huge duh/ blond moment. And it made me think what are some of yours???? Mine was I was driving my camaro to get the new exhaust system installed. The tank said it was full according to the gas gauge. Then I noticed the car slowly died. I was like "what the hell is going on" I looked at the gas gauge again and it said "full". So I was thinking that's just great. Why would it not be getting gas? Well I assumed the gas gauge was right. I sprayed starter fluid into the intake and it started. So I thought " great my fuel pump went out or something is wrong with the wiring. I was in such a hurry to get the car hauled to the garage and get it off the highway I didn't think about getting my gas jug out to see if maybe it needed gas and the gas gauge was sticking.

So as the flat bed comes to get my car I say to my fiance " Watch it I just bet the gas gauge was wrong and it just ran out of gas...and if it did that would kinda save me some money...but I would look like an idiot" so we get the car there. I come back from work...the garage calls and says " Miss King? Your camaro ran out of gas" OMG I died laughing and explained to them why I even brought it there and they at least had their good laugh for the day. But yes that was my "DUH" moment. What are yours??
Reply
Old Mar 2, 2010 | 05:28 PM
  #2  
five7kid's Avatar
Moderator
25 Year Member
iTrader: (14)
 
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Cute story, but doesn't have anything to do with engine swaps.
Reply
Old Mar 2, 2010 | 05:33 PM
  #3  
Skyset's Avatar
Member
 
Joined: Jul 2009
Posts: 225
Likes: 0
From: T.DoT, Canada
Car: 86 Iroc-Z
Engine: 305 (TPI)
Transmission: 700r4
Axle/Gears: i dunno lolz
Re: What was your "DUH" moment while working on your car??

That is pretty funny, but I'd probably do the same thing and tow it away lol
Reply
Old Mar 2, 2010 | 06:13 PM
  #4  
mister_hudson's Avatar
Member
iTrader: (3)
 
Joined: Jan 2009
Posts: 319
Likes: 0
From: Classified
Car: '92 Z28 Convertible
Engine: 305ci TPI
Transmission: 700R4 shifted
Axle/Gears: 2.73 (for now)
Re: What was your "DUH" moment while working on your car??

You poor thing! The good news is that you are only out a tow and a tank of gas!
Reply
Old Mar 2, 2010 | 08:50 PM
  #5  
CassieMarie88's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2009
Posts: 52
Likes: 0
From: Lima, Ohio
Car: 88 Camaro RS/88 Camaro RS
Engine: 2.8 V6/1975 350 4 bolt main
Transmission: Manuel/Automatic
Axle/Gears: Factory/After Market
Re: What was your "DUH" moment while working on your car??

Originally Posted by Skyset
That is pretty funny, but I'd probably do the same thing and tow it away lol
LOL well I mean I was on a freakin highway pulled off to the side. And I had legal tags and insurance BUT there was no exhaust on it at all and I was afraid if I waited too long the cops would find it and drag it away for me costing me more money and I would have been super ticked. So yea I just wanted it off the highway and to a safe area. But oh well lesson learned now I really gotta look at the gauge and hope it works...I will be ticked if I gotta replace that to.
Reply
Old Mar 3, 2010 | 05:54 PM
  #6  
danandamy's Avatar
Member
 
Joined: Nov 2006
Posts: 248
Likes: 0
From: Tx
Car: 86 Camaro
Engine: 305
Transmission: 700r4
Axle/Gears: 3.73
Re: What was your "DUH" moment while working on your car??

Closest thing I've got is I did a cam swap on an old Mercury Capri 302 we had several years ago. Was just finishing up buttoning everything up, fixing to fire it up to break the cam in and putting my tools away when I look down and there sits the cam eccentric for the fuel pump. Had to tear everything off the front of the engine again, damned Ford.

Dan
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
specialized
TPI
27
Jun 18, 2022 09:26 AM
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
TheExaminer
Cooling
26
Aug 26, 2015 04:59 PM
jharrison5
Engine Swap
5
Aug 19, 2015 05:53 PM




All times are GMT -5. The time now is 06:03 PM.