Desktop Dyno
#1
Junior Member
Thread Starter
Join Date: Jan 2009
Location: Fayetteville, TN
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Desktop Dyno
I need some help guys, I'm at the cam selection stage in my build and was wondering if anyone could help me out and plugging my info into desktop dyno and let me know roughly what to expect.
327 bored .040 over
062 vortec heads-mild port job
1.6 roller rockers
weiand air gap style intake
1 5/8 shorty headers, muffler, no cat, and 3 inch pipe
Barebones hydraulic cam and lifters
adv. duration 278/288
.50 duration 232/242
gross valve lift .507/.507
lsa 112 degrees
intake centerline 108 degrees
rpm range 2000-6400
750 carb
Any help would be greatly appreciated. Thanx in advance
327 bored .040 over
062 vortec heads-mild port job
1.6 roller rockers
weiand air gap style intake
1 5/8 shorty headers, muffler, no cat, and 3 inch pipe
Barebones hydraulic cam and lifters
adv. duration 278/288
.50 duration 232/242
gross valve lift .507/.507
lsa 112 degrees
intake centerline 108 degrees
rpm range 2000-6400
750 carb
Any help would be greatly appreciated. Thanx in advance
Last edited by rs_z28_vert; 03-12-2010 at 03:23 AM.
#2
Junior Member
Thread Starter
Join Date: Jan 2009
Location: Fayetteville, TN
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: Desktop Dyno
here are a couple of links
http://www.lunatipower.com/CamSpecCa...rtNumber=10021
https://www.lunatipower.com/Product....d=2548&gid=312
http://www.lunatipower.com/CamSpecCa...rtNumber=10021
https://www.lunatipower.com/Product....d=2548&gid=312
Thread
Thread Starter
Forum
Replies
Last Post
darwinprice
Organized Drag Racing and Autocross
17
10-11-2015 11:51 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
10-08-2015 08:34 PM