I am building a 350 to drop into my camaro.

I have a block which i will either hone and keep the boars stock or i will go .020 or .030 over.

I also have heads for my 350 build
casting # 3927186
intake 2.02" exhaust 1.6" chamber CC 63.305
a little porting done to them.
stainless 2.02 in manley intake valves
metal viton seals
3/8 rocker stud
magnaflux by the shop that did the work


Now for my cam question. I have been checking CL because you never know what someone could be selling.

the cam is This one

Comp cam Grind# 268H
Intake 268 exhaust 268
RPM Range 1500 to 5500


Heads

 

Good cam.

Any idea what intake gasket they used to port match the heads?

 

No clue on the gasket. it was ported when the guy i bought them from bought them.

Will that cam be good for 300+ hp.

He is wanting $150 for the cam new, lifters new, stock oil pump new, double roller gears and chain new, and some msc gaskets.

 

so i was talking to my step dad and he said that this cam which i bought will not get me to my 300+ HP goal. what do you guys think.

 

That cam will make 300 + hp easy.

 

sounds good i guess i will give it a try and hope for the best.