Switching from synthetic engine oil to regular engine oil??
Thread Starter
Senior Member
iTrader: (4)
Joined: Apr 2009
Posts: 617
Likes: 0
From: Ontario
Car: 1984 Camaro Berlinetta
Engine: 355
Transmission: T5
Axle/Gears: Australian 9 bolt 3.27 posi
Switching from synthetic engine oil to regular engine oil??
Hello, I have a small block in my camaro. The motor was rebuilt a few years back and since day one I have been using synthetic engine oil. Well it seems I now have a leak at the rear engine seal. So at this point I'm not ready to fix the leak, I just want to change the oil out for new oil and thought that I might just use regular engine oil like castrol 10w30 instead of the full synthetic. Will changing from synthetic to regular engine oil hurt the engine? Or is it okay to do this? Thanks in advance
Re: Switching from synthetic engine oil to regular engine oil??
Hello, I have a small block in my camaro. The motor was rebuilt a few years back and since day one I have been using synthetic engine oil. Well it seems I now have a leak at the rear engine seal. So at this point I'm not ready to fix the leak, I just want to change the oil out for new oil and thought that I might just use regular engine oil like castrol 10w30 instead of the full synthetic. Will changing from synthetic to regular engine oil hurt the engine? Or is it okay to do this? Thanks in advance
no it won't hurt at all
www.amazon.com and look for White Shepherd Rear Main Sealer
it's $12 and might stop that rear main leak
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Joined: Sep 2005
Posts: 27,867
Likes: 2,428
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Switching from synthetic engine oil to regular engine oil??
Perfectly valid thing to do. No problem.
2 easy steps:
1. Drain old oil (incl filter)
2. Pour in new (incl pour a quart into new filter before putting on)
There, not so challenging, was it?
2 easy steps:
1. Drain old oil (incl filter)
2. Pour in new (incl pour a quart into new filter before putting on)
There, not so challenging, was it?
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
Navy8125
Engine/Drivetrain/Suspension Parts for Sale
4
Aug 21, 2015 09:32 AM








