Fuel hose connection issue(picture)
Thread Starter
Junior Member
Joined: Nov 2010
Posts: 18
Likes: 0
From: Ontario
Engine: 2.8L V6
Transmission: 7004r
Fuel hose connection issue(picture)
Hi guys,
I've been working on my 2.8L MPFI Firebird and have hit a stupid roadblock.
I had to replace the fuel hoses, because the PO had installed CARB rated hoses, and I need Fuel Injection rated hoses to pass safety.
Now this wasnt much difficulty until I tried to reconnect the hose to this end.
I dont remember having any issue taking it off, but I cant figure out how to force the new hose over this (almost) 90 degree bend.
IF anyone has experienced this issue any help would be greatly appreciated.
I've been working on my 2.8L MPFI Firebird and have hit a stupid roadblock.
I had to replace the fuel hoses, because the PO had installed CARB rated hoses, and I need Fuel Injection rated hoses to pass safety.
Now this wasnt much difficulty until I tried to reconnect the hose to this end.
I dont remember having any issue taking it off, but I cant figure out how to force the new hose over this (almost) 90 degree bend.
IF anyone has experienced this issue any help would be greatly appreciated.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Looks like the metal part had a tube cutter applied to it.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 25, 2015 11:49 PM