Doing a 383. Are my heads good?
Thread Starter
Senior Member
Joined: Feb 2008
Posts: 634
Likes: 1
From: Orland Park,IL
Car: Chevrolet Camaro IROC-Z,96 Vette
Engine: 350 5.7 Liter
Transmission: 700r
Doing a 383. Are my heads good?
After a failed attempt last year for my car, I need to rebuild motor so 383 now
. Anyway, I have a lot of new parts (see blow) and im wondering if I should look at different heads (AFR 195) or keep my Patriots (see below). They only have 100miles on them! Also what horsepower (to wheels) should I see and 1/4 mile.
Whats done:
Comp 503 Cam
StealthRam intake
Holley Fuel Rials
30lbs injectors
Walbro 255
GM Performance Oil Pump
1:6 Rockers
Patriot Heads Click>>>>>>>>> http://www.competitionproducts.com/P...tinfo/PAT2187/
373 Rear Gears
MSD Cap/Rotor/Wires (10mm)
What will be done over winter
Bore/Stroke 383
Eagle stroker kit (Is this good? Heard up and down opinions)
Stall (What can my rear end handle before it breaks an axle?)
Sorry for all the ??? Im trying to get everything sorted out. Thanks!
. Anyway, I have a lot of new parts (see blow) and im wondering if I should look at different heads (AFR 195) or keep my Patriots (see below). They only have 100miles on them! Also what horsepower (to wheels) should I see and 1/4 mile.Whats done:
Comp 503 Cam
StealthRam intake
Holley Fuel Rials
30lbs injectors
Walbro 255
GM Performance Oil Pump
1:6 Rockers
Patriot Heads Click>>>>>>>>> http://www.competitionproducts.com/P...tinfo/PAT2187/
373 Rear Gears
MSD Cap/Rotor/Wires (10mm)
What will be done over winter
Bore/Stroke 383
Eagle stroker kit (Is this good? Heard up and down opinions)
Stall (What can my rear end handle before it breaks an axle?)
Sorry for all the ??? Im trying to get everything sorted out. Thanks!
Thread Starter
Senior Member
Joined: Feb 2008
Posts: 634
Likes: 1
From: Orland Park,IL
Car: Chevrolet Camaro IROC-Z,96 Vette
Engine: 350 5.7 Liter
Transmission: 700r
Thread
Thread Starter
Forum
Replies
Last Post
NinjaNife
Tech / General Engine
27
Aug 23, 2015 11:49 AM
