Why is it not running the same?
Thread Starter
Member
Joined: Sep 2011
Posts: 219
Likes: 0
Why is it not running the same?
My car ran so good when I first got running.
Then I took it somewhere to have the master and slave replaced and the clutch bleed. Now it runs worse, doesnt sound right. I'm curious if the timing was messed with or maybe the a/f?
Here's it running well
http://i1101.photobucket.com/albums/...6/f36f804c.mp4
Here's it running poorly
http://i1101.photobucket.com/albums/...6/c94546bc.mp4
Then I took it somewhere to have the master and slave replaced and the clutch bleed. Now it runs worse, doesnt sound right. I'm curious if the timing was messed with or maybe the a/f?
Here's it running well
http://i1101.photobucket.com/albums/...6/f36f804c.mp4
Here's it running poorly
http://i1101.photobucket.com/albums/...6/c94546bc.mp4
Last edited by Slayerx666; Dec 23, 2011 at 08:36 AM.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Check the spark plug wires for proper routing, that they're all attached, not shorting out to headers, etc.
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM
