stock head question
#1
Junior Member
Thread Starter
Join Date: May 2011
Location: buffalo NY
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: first gen small block 350
Transmission: 700r4
Axle/Gears: stock
stock head question
I have a pair.of stock 350 heads. Casting number is 3932441 says its from a 1967-72 motor intake 1.94 exhaust is 1.5 says intake flow is 152cc exhaust is 93.2cc.
Well my question is what could I do to these heads to improve them. Please don't tell me.to buy new ones bc I.don't have the money for that atm and I don't want newer heads for this build. So if anyone has anysuggestions that would be awsome.
Well my question is what could I do to these heads to improve them. Please don't tell me.to buy new ones bc I.don't have the money for that atm and I don't want newer heads for this build. So if anyone has anysuggestions that would be awsome.
#2
Junior Member
Thread Starter
Join Date: May 2011
Location: buffalo NY
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: first gen small block 350
Transmission: 700r4
Axle/Gears: stock
Re: stock head question
well from what i have seen online , these heads have 9:1 compression?
is this true?
if so i wanna use either the comp cam extreme energy cam or the thumper cam.
thumper cam says i need atleast 9 to 1. the motor itself is a 1978 350 with as from what i know is still stock. so will my engine still get the 9 to 1 or no? so,e help would be great !
is this true?
if so i wanna use either the comp cam extreme energy cam or the thumper cam.
thumper cam says i need atleast 9 to 1. the motor itself is a 1978 350 with as from what i know is still stock. so will my engine still get the 9 to 1 or no? so,e help would be great !
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM
NinjaNife
Tech / General Engine
27
08-23-2015 11:49 AM