Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

So I bought this oil dipstick will it fit?

Thread Tools
 
Search this Thread
 
Old Mar 25, 2012 | 08:42 AM
  #1  
xxZ28xx's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Aug 2011
Posts: 317
Likes: 0
From: Florida
Car: 1988 Camaro, Holley 600 series.
Engine: 350 w/350 TPI heads
Transmission: 90+ 700R4
Axle/Gears: not sure
So I bought this oil dipstick will it fit?

UGH.. the joys of ordering from the lowest source on the internet. They sent me a 82-85 oil dipstick. My car is an 88 will this dipstick fit on my car considering there all third gens? I mean.. it looks pretty similar.

fml

Reply
Old Mar 25, 2012 | 08:58 AM
  #2  
InfernalVortex's Avatar
Supreme Member
20 Year Member
Liked
iTrader: (4)
 
Joined: Dec 2005
Posts: 6,499
Likes: 31
From: Macon, GA
Car: 1992 Camaro RS
Engine: Vortec headed 355, xe262
Transmission: T56
Axle/Gears: 9-bolt 3.70
Re: So I bought this oil dipstick will it fit?

Since any engine could bei n any car at this point...

Just look at it and see. If it'a short job, like 4-6 inches tall, it mounts into the head deck surface and the dipstick goes through the block all the way to the pan. If it's really long, it mounts into the side of the block nearly at the oilpan. Just see which version your block has. I think there was another variant, but those are the two most common I think.
Reply
Old Mar 25, 2012 | 09:02 AM
  #3  
xxZ28xx's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Aug 2011
Posts: 317
Likes: 0
From: Florida
Car: 1988 Camaro, Holley 600 series.
Engine: 350 w/350 TPI heads
Transmission: 90+ 700R4
Axle/Gears: not sure
Re: So I bought this oil dipstick will it fit?

ok.. Its pretty long. Im going to do a complete oil change and then see if it reads right so hopefully it does and ill be happy. Thanks for your help.
Reply
Old Mar 25, 2012 | 09:04 AM
  #4  
InfernalVortex's Avatar
Supreme Member
20 Year Member
Liked
iTrader: (4)
 
Joined: Dec 2005
Posts: 6,499
Likes: 31
From: Macon, GA
Car: 1992 Camaro RS
Engine: Vortec headed 355, xe262
Transmission: T56
Axle/Gears: 9-bolt 3.70
Re: So I bought this oil dipstick will it fit?

Originally Posted by xxZ28xx
ok.. Its pretty long. Im going to do a complete oil change and then see if it reads right so hopefully it does and ill be happy. Thanks for your help.
The long ones are stock for the later model third gens, so hopefully it is correct for you. Look down the side of the block on the passenger side and see if you can see the boss for it. Look above the starter area.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
maroe624
Transmissions and Drivetrain
4
Apr 16, 2017 08:29 AM
86IROC112
Engine/Drivetrain/Suspension Wanted
7
Sep 7, 2015 01:37 PM
Navy8125
Engine/Drivetrain/Suspension Parts for Sale
4
Aug 21, 2015 09:32 AM
johanlindgren
Interior
2
Aug 16, 2015 12:16 AM
matthew911
Engine Swap
13
Aug 12, 2015 09:38 AM




All times are GMT -5. The time now is 10:00 AM.