Im replacing my air cleaner in my 1990 rs 305 tbi 700r4 and I need to know what to do with the sensors. All of the, including the one on the snorkel. I am replacing it with an edelbrock 14 inch chrome cleaner

 

I assume you mean the idle air temp sensor? I would add a grommet to the new air cleaner and keep it, but maybe put it in the back, out of view. It really is a helpful little sensor

 

Yeah there's two inside the old cleaner one attached to the passengers side one down. By the tb and one on the snorkel I need too know what todo with all of them

 

the one with the vacuum hoses going to it is for the heat stove.. just remove it and plug the port on the carb.. the iat (inlet air temperature) sensor can be installed in the new air cleaner wherever it clears.. one thing you forgot is that you will need to either get a breather to replace the breather tube that goes from the passenger side valve cover or plumb that into the base of the air cleaner somehow.

 

So can I just buy a little breather filter? Like the ones autozone sells?